10.3 VTL Configuration
Figure 152: Media Add Page
To add virtual tape cartridges to a partition:
1. In the Partition drop-down box, select the partition where the media will be created.
2. Under Add Contiguous Media, enter information about the media:
Initial Location The initial location for cartridges after they are
created (Storage Slot or I/E Slot).
If you are editing a partition, only the Library
Model, Number of Storage Slots, and Number
of Virtual Tape Drives options can be changed.
Number of Media The number of cartridges to create in the partition.
ETERNUS CS800 212
To Next Page
Loading...
