10.9 System
characters are allowed.
3. Click Apply.
Enabling SSH/CLI Service Account
The SSH service account provides SSH remote access to the ETERNUS CS800 system.
1. Under SSH Service, do one of the following steps:
l Select the Enable SSH Service Login check box to enable SSH service
l Clear the Enable SSH Service Login check box to disable the SSH service account
2. The SSH service account may be configured with Secure Shell (SSH) key-based
authentication.
Add a SSH Public Key
a. Click Add.
The Add Public Key page displays.
Figure 219: Add Public Key Page
b. Enter an SSH Alias for the public key.
Additional Information
l An alias can be up to 20 characters.
l Alias must be an alphanumeric string (no spaces or special characters).
c. Enter the Public Key generated from a SSH key.
Additional Information
l A public key should be in the following form: <key-type> <base64 encoded
string>
l A public key length can be up to 16kb.
ETERNUS CS800 316
To Next Page
Loading...
