11.2 Replication Send
The status of the synchronization job displays in the Job Status column.
To cancel the synchronization job, select the share or partition and click Abort.
Directory/File or Cartridge Based Replication Queue
The Directory/File or Cartridge Based Replication displays replication statistics for shares or
partitions that are configured for Directory/File or Cartridge Based Replication (see
"Configuring Directory/File or Cartridge Based Replication" on page 351).
To view the Directory/File or Cartridge Based Replication Queue:
1. Select a share or partition that is configured for Directory/File or Cartridge Based
Replication.
If multiple targets are configured, click the arrow next to the share or partition to
display all targets, and then select the desired target.
2. Click Queue.
Figure 245: Directory/File or Cartridge Based Replication Queue
The Directory/File or Cartridge Based Replication Queue displays the following
information for the share or partition:
File/Directory or Barcode The file/directory or cartridge to be replicated.
State The replication state for the file/directory or cartridge.
Progress The percentage complete for replication of the
file/directory or cartridge.
Estimated Duration The estimated time it will take to complete
replication for the file/directory or cartridge.
The estimated duration may display as
unknown if replication has been very recently
initiated. After the system has enough
information to calculate a value, the estimated
duration will display.
ETERNUS CS800 355
To Next Page
Loading...
