11.4 Receive VTL
Figure 259: Failback Jobs Page
The Snapshot Failback Jobs section displays the following information about failback jobs:
Partition Name The name of the partition the snapshot was created from.
Destination System The hostname of the system that the snapshot was sent
to.
Started The time the failback job was started.
Finished The time the failback job finished.
Status The status of the failback job (Success, In Progress, or
Failed).
Use the Failback Jobs page to perform the following tasks:
To delete information for a failback job, select it in the Snapshot Failback Jobs section and
click Delete Job Info.
To abort a failback job that is in progress, select it in the Snapshot Failback Jobs section
and click Abort.
Cartridge Based
The Cartridge Based page allows you to manage Cartridge Based Replication on the target
system. You can configure a VTL partition to receive Cartridge Based Replication data sent
from a source system and view replication statistics for the partition.
For information about creating VTL partitions, see "Adding a VTL Partition" on
page 206.
To access the Cartridge Based page, on the Receive VTL page, click the Cartridge Based
tab (see "Cartridge Based Page" on page 375).
ETERNUS CS800 374
To Next Page
Loading...
