12.3 Performance
Figure 273: Fibre Channel Page
Use the Fibre Channel page to display recent fibre channel activity in dynamic graphs:
l The top graph reports data received and the bottom graph reports data sent.
l Select the port to monitor in the Fibre Channel drop-down box, or select Avg to
display an average of all ports.
l The horizontal axis displays time (0–100 seconds).
l The vertical axis displays data throughput (0–500 MB/s).
l Values that exceed the maximum value of the vertical axis are shown in lighter green.
l Each bar on the graph represents approximately 1 second of time.
l Hold the cursor over a bar to display the value of the bar.
CPU
The CPU page allows you to view CPU usage.
ETERNUS CS800 392
To Next Page
Loading...
