3.1 Server
Connectors and indicators on the I/O panels
Figure 11: I/O panel connectors and indicators
The first table below describes the connectors on the I/O panels of the ETERNUS CS800
servers (1, 2, ... in the figure above). The second table contains the indicators located on
the rear side I/O panels of the servers (marked with A,B,...).
Item Description
1 USB 2.0 connector(s)
2 Dynamic LoM
The LAN connectors on the dynamicLoM modules are numbered in ascending
order from right to left beginning with "0". The rightmost connector (LAN 0) is the
service port.
3 USB 3.0 connectors (SuperSpeed USB)
4 Management LAN connector
(for iRMC S4 server management function)
5 Video connector (VGA)
Table 3: Connectors on the I/O panel
ETERNUS CS800 45
To Next Page
Loading...
