Fujitsu ETERNUS CS800 S6 - Page 59

3.2 Storage Modules
Figure 31:
Figure 32: Rear view of JX40 S2- I/O module
LED name LED status Description
SAS INlink green The link between the SAS IN port and the source port has been
established.
SAS IN fault amber The ports to remove the mini SAS HD cables between
enclosures from are indicated. This occurs while a drive
enclosure is being added.
SASOUT link green The link between the SAS OUT port and the destination port has
been established.
SASOUTfault amber The link between the SAS OUT port and the destination port is
in error status.
READY LED green The I/O module is in normal status.
IDENTIFY LED blue Identifies the installation location of the I/O module.
FAULT LED amber The I/O module is in error status.
Table 10: Status and meanings of each LED (I/O module)
Power Supply Units
The power supply unit transforms input AC power from a power socket to DC power and
supplies power to each component.
Each power supply unit contains fans.
ETERNUS CS800 59