3.2 Storage Modules
Figure 42: Rear view of DX100 S3 drive enclosure
Figure 43: Rear view of DX100 S3 - I/O module
LED name LED status Description
DI (IN) LINK green The link between the DI (IN) port and the source port
has been established.
DI (IN) FAULT amber The ports to remove the mini SAS HD cables between
enclosures from are indicated. This occurs while a
drive enclosure is being added.
amber blinking The ports to connect the cables are indicated. This
occurs while a drive enclosure is being added.
DI (OUT) LINK green The link between the DI (OUT) port and the
destination port has been established.
DI (OUT) FAULT amber The link between the DI (OUT) port and the
destination port is in error status.
amber blinking The ports to connect the cables are indicated. This
occurs while a drive enclosure is being added.
Ready green The I/O module is in normal status.
ETERNUS CS800 67
To Next Page
Loading...
