Appendix B Factory Default List
B.5 Thin Provisioning Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
1007
*1: The default value varies depending on the type of drives that are installed in the ETERNUS DX and that can be used
to create new TPPs.
■ Rename Thin Provisioning Pool
■ Expand Thin Provisioning Pool
■ Modify Threshold Thin Provisioning Pool
Manual Setting Drive Type Online (*1)
RAID Level Striping (RAID0)
Fast Recovery Configuration
• When the RAID level is "High Reliability
(RAID6-FR)"
(4D+2P)x2+1HS
• When the RAID level is not "High Reliability
(RAID6-FR)"
Blank
Encryption by CM Off
Alarm
Warning 90 (%)
Attention 70 (%)
Add RAID Group Controlling CM Automatic
Checkbox to select a drive All cleared
Advanced Setting Stripe Depth 64 KB
Screen Setting item Default value
Screen Setting item Default value
Rename Setting Start of Suffix 0
Screen Setting item Default value
Setting Thin Provisioning Pool Expand Mode Automatic
Manual Setting
(Add RAID Group)
Controlling CM Automatic
Screen Setting item Default value
Threshold Setting Warning 90 (%)
Attention 75 (%)
To Next Page
Loading...
