Appendix A Parameter List
A.7 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
941
Total Copy Capacity (Restore OPC is not used)
= Copy capacity for QuickOPC (5GB
x 10 sessions) = 50GB
Sessions (Restore OPC is not used)
= The number of QuickOPC sessions (10 sessions) = 10 sessions
A.7.4 Modify Copy Parameters
For details about this function, refer to "7.7 Modify Copy Parameters" (page 608).
For the factory default settings for this function, refer to "Appendix B Modify Copy Parameters" (page 1010)
.
● Policy of Snap Data Pool
• Policy Level 1 (Informational) Threshold
• Policy Level 2 (Warning) Threshold
• Policy Level 3 (Error) Threshold
● SDPE Setting
• SDPE
Description If the usage of SDP exceeds the specified threshold, the ETERNUS DX notifies that effect
as the Policy Level 1 (Informational).
Input condition/
Display contents
1 - 97
Description If the usage of SDP exceeds the specified threshold, the ETERNUS DX notifies that effect
as the Policy Level 2 (Warning).
Input condition/
Display contents
2 - 98
Description If the usage of SDP exceeds the specified threshold, the ETERNUS DX notifies that effect
as the Policy Level 3 (Error).
Input condition/
Display contents
3 - 99
Description Select SDPE (GB).
Input condition/
Display contents
• 1
• 2
• 4
To Next Page
Loading...
