Fujitsu ETERNUS DX60 S3 - Disable Audit Log

Chapter 1 System Management
1.10 Audit Log Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
163
2 Click the [OK] button.
 Enabling of the audit log starts.
3 Click the [Done] button to return to the [Audit Log] screen.
End of procedure
1.10.2 Disable Audit Log
This function disables the audit log function.
For the factory default settings for this function, refer to "Appendix B Audit Log" (page 983)
.
The procedure to disable the audit log function is as follows:
Procedure
1 Click [Disable Audit Log] in [Action].
 A confirmation screen appears.
2 Click the [OK] button.
 Disabling of the audit log starts.
3 Click the [Done] button to return to the [Audit Log] screen.
End of procedure
If the audit log function has already been disabled, [Disable Audit Log] cannot be clicked.