Fujitsu ETERNUS DX60 S3 - A.4.5 Host Response Management

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
870
● LUN Setting
A.4.5 Host Response Management
A.4.5.1 Add Host Response
For details about this function, refer to "4.5.1 Add Host Response" (page 471).
For the factory default settings for this function, refer to "Appendix B Add Host Response" (page 999)
.
● Host Response Name
• Name
● LUN Setting
• LUN Addressing
Refer to "LUN Setting" (page 869) in "Add LUN Group" (page 868) for details.
For more details on setting the host response parameters, refer to "FUJITSU Storage ETERNUS DX
Configuration Guide -Server Connection-" for each OS type.
Description Specify the host response name.
An existing host response name cannot be used.
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Description Select the appropriate LUN addressing for each OS.
Input condition/
Display contents
• Peripheral device addressing (Default)
This mode enables mapping to 256 LUNs.
• Flat space addressing
his mode enables mapping to 4096 LUNs.