Fujitsu ETERNUS DX60 S3 - System Settings; A.1.3 System Settings

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
667
A.1.3 System Settings
A.1.3.1 Modify Storage System Name
For details about this function, refer to "1.4.1 Modify Storage System Name" (page 32).
● Set the Name of the Storage System
• Name
• Installation Location
• Administrator
• Description
A.1.3.2 Modify Date and Time
For details about this function, refer to "1.4.2 Modify Date and Time" (page 34).
For the factory default settings for this function, refer to "Appendix B Modify Date and Time" (page 972)
.
● Date/Time Settings
• Date
Description Specify the storage system name (required).
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Description Specify the installation location of the ETERNUS DX.
Input condition/
Display contents
• 0 to 50 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Description Specify the administrator information (the administrator name, contact information,
etc) of the ETERNUS DX.
Input condition/
Display contents
• 0 to 50 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Description Specify the description of the ETERNUS DX.
Input condition/
Display contents
• 0 to 50 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Description Change the current date and time settings.
Input condition/
Display contents
YYYY-MM-DD hh:mm:ss (YYYY: Year (2001 - 2037), MM: Month (01 - 12), DD: Date (01 -
31), hh: Hour (00 - 23) , mm: Minute (00 - 59), ss: Second (00 - 59))