Chapter 1 System Management
1.9 Event/Dump Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
150
2 Click the [Delete] button.
A confirmation screen appears.
3 Click the [OK] button.
Deletion of event logs starts.
4 Click the [Done] button to return to the [Event/Dump] screen.
1.9.3 Export/Delete Log
This function exports and saves the ETERNUS DX maintenance information (log) in accordance with user-
specified time settings.
An exported log can be stored on a floppy disk or hard disk, or sent by E-mail.
Also, users can select a log segment size to suit the destination it is to be saved.
• Exported Maintenance Information
- The storage system log includes "internal log" and "configuration information".
• Internal log
Detected errors, warnings, and traces
• Configuration definition information
Configuration information exported from the ETERNUS DX
- When an ETERNUS DX in a Unified Storage environment, the storage system log and the NAS Engine log
(CM#0/CM#1) are stored in different files (total of three files).
• The internal log and configuration information cannot be exported separately.
• When exporting the log is complete, save the log file immediately.
• The various pieces of maintenance information are combined together, compressed, and then
segmented into the user specified segment size before being exported.
Special tools to read these logs are required.
To Next Page
Loading...
