Fujitsu ETERNUS DX60 S3 - Modify Host Group (SAS)

Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
399
(6) After adding or deleting iSCSI hosts is complete, click the [Modify] button.
 A confirmation screen appears.
4 Click the [OK] button.
 Modification of the iSCSI host group starts.
5 Click the [Done] button to return to the [Host Group] screen.
End of procedure
4.2.8 Modify Host Group (SAS)
This function performs the following modifications to the existing SAS host group.
• Changing the "Host Group Name" settings
• Changing the "Host Response" settings
• Changing the "Host" settings (including addition and deletion of member hosts in a host group)
Hosts can be added to host groups which the host affinity setting has been already configured, or deleted
from host groups.
If a host is added, the host affinity setting is automatically configured to the host, as a host group member.
If a host is deleted, the host affinity setting is cleared from the corresponding host.
The number of hosts that can be registered
*1: The total number of hosts irrespective of the interface types.
Model Number of hosts (HBAs)
(*1) per storage system
Number of hosts (HBAs)
per CA port
Number of hosts (HBAs)
per host group
ETERNUS DX60 S3 128 32
8ETERNUS DX100 S3
1024 256
ETERNUS DX200 S3