Fujitsu ETERNUS DX60 S3 - Chapter 5 RAID Group Management

ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
526
Chapter 5
RAID Group Management
This chapter describes RAID group management.
When using functions in the Action area, select the desired function from the Action area that is displayed in
the status display screen.
The functions in the Action area for RAID group can be performed from the following display functions:
Functions in the Action area for RAID Group Display function
Create RAID Group
• RAID Group (Basic Information)
Delete RAID Group
Rename RAID Group
Change Controlling CM
Expand RAID Group
Modify RAID Group Parameters
• Tuning
Assign Eco-mode Schedule (RAID Group)
• Eco-mode Schedule (RAID Group)
Set Key Group (RAID Group)
• SED Key Group
Recovery SED