Fujitsu ETERNUS DX60 S3 - Disable ODX

Chapter 7 Advanced Copy Management
7.9 ODX Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
661
3 Click the [Done] button to return to the [Setting] screen.
End of procedure
7.9.2 Disable ODX
This function disables the ODX function.
For the factory default settings for this function, refer to "Appendix B ODX" (page 1012)
.
The procedure to disable the ODX function is as follows:
Procedure
1 Click [Disable ODX] in [Action].
 A confirmation screen appears.
2 Click the [OK] button.
 Disabling of ODX starts.
3 Click the [Done] button to return to the [Setting] screen.
End of procedure
• To stop using the ODX function, the server must recognize that ODX is disabled in the ETERNUS DX. After
disabling ODX with this function, reboot the server.
• The ODX function cannot be disabled when ODX Buffer volumes exist in the ETERNUS DX.
Delete the ODX Buffer volume before disabling the ODX function. Refer to "3.2 Delete Volume" (page 272) for
details.