Appendix A Parameter List
A.2 Component Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
780
A.2 Component Management
This section provides information on the parameters of the following action for component management.
• Add Drive Enclosure
• Add Channel Adapter Port
A.2.1 Add Drive Enclosure
For details about this function, refer to "2.6 Add Drive Enclosure" (page 237).
● Target Drive Enclosure
• Type
A.2.2 Add Channel Adapter Port
For details about this function, refer to "2.7 Add Channel Adapter Port" (page 242).
● Add Channel Adapter Port
• License Key
Description Select the DE type that is to be added.
When the DE is not a target to be added, select "-" (hyphen).
For the ETERNUS DX60 S3, only the "3.5" 12DE" can be selected.
Input condition/
Display contents
• 2.5"24DE
• 3.5"12DE
• 3.5"60DE
Description Input the license key.
Input condition/
Display contents
16 capital letters and numeric characters
To Next Page
Loading...
