Appendix A Parameter List
A.7 Advanced Copy Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
936
A.7 Advanced Copy Management
This section provides information on the parameters of the following actions for Advanced Copy management.
• Register Advanced Copy License
• Modify EC/OPC Priority
• Modify Copy Table Size
• Modify Copy Parameters
• Set Copy Path
• Measure Round Trip Time
• Modify REC Buffer
• Create REC Disk Buffer
• Modify REC Multiplicity
• Set REC Bandwidth Limit
• Create ODX Buffer Volume
A.7.1 Register Advanced Copy License
For details about this function, refer to "7.3 Register Advanced Copy License" (page 596).
For the factory default settings for this function, refer to "Appendix B Register Advanced Copy License" (page
1009).
● License Settings
• Registration Method
• License Key
Description Select the registration method for the Advanced Copy license.
"Use Free License" can only be selected when an Advanced Copy license has not been
registered in the ETERNUS DX.
This item is only displayed for the ETERNUS DX60 S3/DX100 S3/DX200 S3 and the ETER-
NUS DX200F.
Input condition/
Display contents
• Use License Key
Register a paid license.
• Use Free License
Register a free license.
Description Enter the Advanced Copy license key.
For the ETERNUS DX60 S3/DX100 S3/DX200 S3 and the ETERNUS DX200F, a license key
can only be entered when "Use License Key" is selected for "Registration Method".
Input condition/
Display contents
16 capital letters and numeric characters
To Next Page
Loading...
