Chapter 3 Volume Management
3.7 TPV Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
288
3.7.2 Modify Thin Provisioning Volume Threshold
This function changes the threshold for monitoring the usage ratio of Thin Provisioning Volume (TPV). The
usage ratio is the ratio of used capacity (physically allocated capacity) to the logical TPV capacity.
For details on the parameters for this function, refer to "A.3.5 Modify Thin Provisioning Volume Threshold"
(page 798).
For the factory default settings for this function, refer to "Appendix B Modify Thin Provisioning Volume
Threshold" (page 989).
The procedure to change the threshold of Thin Provisioning Volume is as follows:
1 Select the TPV for which the threshold is to be changed (multiple selections can be made)
and click [Modify TPV Threshold] in [Action].
2 Specify the new threshold.
The main setting item is as follows.
● Threshold Setting
• New Threshold
3 Click the [Modify] button.
A confirmation screen appears.
4 Click the [OK] button.
Setting of the TPV threshold starts.
• This function changes the threshold of a TPV that is created by using the "3.1 Create Volume" (page 253).
• The same threshold can be applied for multiple TPVs in a single operation.
To Next Page
Loading...
