Fujitsu ETERNUS DX60 S3 - Delete LU Qos Group

Chapter 4 Connectivity Management
4.7 Host-LU QoS Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
500
2 Select a host LUN bandwidth limit.
The main setting item is as follows.
● LU QoS Group Setting
• Bandwidth Limit
3 Click the [Add] button.
 A confirmation screen appears.
4 Click the [OK] button.
 Addition of LU QoS group starts.
5 Click the [Done] button to return to the [LU QoS Group] screen.
End of procedure
4.7.15 Delete LU QoS Group
This function deletes LU QoS groups.
The procedure to delete LU QoS groups is as follows:
Procedure
1 Select the LU QoS group that is to be deleted (multiple selections can be made) and click
[Delete LU QoS Group] in [Action].
 A confirmation screen appears.
An LU QoS group in the "Active" status cannot be deleted.