Chapter 4 Connectivity Management
4.8 NAS Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
517
3 Click the [Set] button.
A confirmation screen appears.
4 Click the [OK] button.
Authentication server setting starts.
5 Click the [Done] button to return to the [Environment Settings] screen.
4.8.10 Add Quota Setting
This function adds a new quota setting information. The drive usage amount (drive space) and the number of
files (file count) can be set for each NAS user volume.
Quota is a threshold for the usable space that is set on each user and group to prevent the depletion of
resources in the ETERNUS DX.
This function is displayed in a Unified Storage environment.
Maximum Quota Setting Information for Each Model
*1: The maximum number of quota setting information for this function may be less in some operating environments.
If an error screen appears under the following conditions, check the parameter settings.
• The authentication server information cannot be obtained
• Each parameter fails to satisfy the input conditions
Model Maximum quota setting information (*1)
ETERNUS DX100 S3 5000
ETERNUS DX200 S3 10000
ETERNUS DX500 S3 15000
ETERNUS DX600 S3 20000
To Next Page
Loading...
