Fujitsu ETERNUS DX60 S3 - Audit Log Management

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
750
A.1.8.3 Export/Delete Panic Dump
For details about this function, refer to "1.9.4 Export/Delete Panic Dump" (page 158).
For the factory default settings for this function, refer to "Appendix B Export/Delete Panic Dump" (page 983)
.
● Panic Dumps
• Panic Dumps
● Option
• Dump File Segment Size
A.1.9 Audit Log Management
A.1.9.1 Setup Audit Log
For details about this function, refer to "1.10.3 Setup Audit Log" (page 164).
For the factory default settings for this function, refer to "Appendix B Setup Audit Log" (page 983)
.
● Syslog Server1, Syslog Server2
• Send Audit Log
Description Select a checkbox for the panic dump to be exported (only one panic dump can be
selected).
Input condition/
Display contents
Checkbox
• Selected
• Cleared
Description Select the file size (segment size) when saving the exported panic dump.
Input condition/
Display contents
• Non-segmentation
• 4.27 MB
• 1.44MB (Floppy Disk)
• 640KB (E-Mail)
Description Select the audit log sending parameters.
Logs are sent in the selected RFC message format.
Input condition/
Display contents
• on (RFC3164)
• on (RFC5424)
• off