Chapter 5 RAID Group Management
5.3 Rename RAID Group
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
536
5.3 Rename RAID Group
This function changes the name of RAID groups that are registered in the ETERNUS DX.
Multiple RAID groups can be renamed with a single operation.
For details on the parameters for this function, refer to "A.5.2 Rename RAID Group" (page 914)
.
For the factory default settings for this function, refer to "Appendix B Rename RAID Group" (page 1004)
.
The procedure to rename RAID group is as follows:
1 Select the RAID group to be renamed (multiple selections can be made) and click [Rename]
in [Action].
2 Input the new "Name" and the "Start of Suffix".
The main setting items are as follows.
● Rename Setting
• Name
• Start of Suffix
The following RAID groups cannot be renamed:
• RAID groups that configure FTRPs
• RAID groups that are registered as EXCPs
To Next Page
Loading...
