Fujitsu ETERNUS DX60 S3 - Export All Copy Path

Chapter 7 Advanced Copy Management
7.8 REC Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
637
The procedure to delete all of the copy paths is as follows:
Procedure
1 Click [Delete All Copy Path] in [Action].
 A confirmation screen appears.
2 Click the [OK] button.
 Deletion of all the copy paths starts.
3 Click the [Done] button to return to the [Copy Path] screen.
End of procedure
7.8.4 Export All Copy Path
This function exports the copy path information registered in the ETERNUS DX, and saves the information in a
file.
The saved file can be used as path information when creating or changing a copy path, so that manual
registration of the path information will not be required.
The bandwidth limit for the path is also deleted when the copy path has been deleted.
• Registering the Advanced Copy function license or the Storage Cluster function license is required to use
this function.
• A copy path information cannot be exported when it has not been registered in the ETERNUS DX.
• The bandwidth limit for a copy path cannot be exported.