Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
385
4.2.4 Delete Host Group
This function deletes a host group. When a host group is deleted, the hosts, which belong to the host group,
are also deleted.
The procedure to delete a host group is as follows:
1 Select the host group to be deleted (multiple selections can be made) and click [Delete Host
Group] in [Action].
A confirmation screen appears.
2 Click the [OK] button.
Deletion of the host group starts.
3 Click the [Done] button to return to the [Host Group] screen.
4.2.5 Modify Host Group
This function performs the following modifications to the existing host group.
• Changing the "Host Group Name" settings
• Changing the "Host Response" settings
• Changing the "Host" settings (including addition and deletion of member hosts in a host group)
Operation screens for modifying host groups vary with the interface types.
• Refer to "4.2.6 Modify Host Group (FC/FCoE)" (page 386)
to modify FC/FCoE host groups.
• Refer to "4.2.7 Modify Host Group (iSCSI)" (page 391)
to modify iSCSI host groups.
• Refer to "4.2.8 Modify Host Group (SAS)" (page 399)
to modify SAS host groups.
The host group, of which host affinity settings have been configured, cannot be deleted.
The host group, of which host affinity settings have been configured (the status of the host group is
"Active"), cannot be deleted.
To Next Page
Loading...
