Chapter 3 Volume Management
3.13 Release Reservation
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
315
3.13 Release Reservation
This function releases the reservation status of volumes that are specified by the host.
Reservation and release reservation of a volume is normally performed from the host. This function must be
used only when a reservation of a volume cannot be released due to errors in the host.
This function provides the following features:
• Releasing the volume reservation status
• Releasing the volume persistent reservation status
• Deleting all the reservation keys that are registered in the ETERNUS DX
The procedure to release the reservation status is as follows:
1 Select the volumes to release the reservation (multiple selections can be made), and click
[Release Reservation] in [Action].
A confirmation screen appears.
2 Click the [OK] button.
Releasing volume reservation status starts.
3 Click the [Done] button to return to the [Volume] screen.
Be sure to pay attention when releasing reserve status as it may cause data corruption. Check the status of
the target volume before using this function.
To Next Page
Loading...
