Appendix B Factory Default List
B.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
972
■ Modify Date and Time
■ Change Box ID
Screen Setting item Default value
Date/Time Settings Date The current date and time that is specified in the
ETERNUS DX.
(When the ETERNUS DX is installed in Japan, the
local time for Japan is displayed)
Time Zone Settings Time Zone
• When the ETERNUS DX is shipped from Japan
and shipped to Japan (GMT+09:00) Tokyo,
Osaka, Kyoto, Fukuoka, Sapporo
• When the ETERNUS DX is shipped from Japan
to regions other than Japan (GMT+00:00)
Dublin, London, Manchester, Lisbon
The default value depends on the shipment
information.
• When selecting "Manually" in the "Time Zone"
field
+00:00
Daylight Saving Time Settings Daylight Saving Time Disable
Range By day of the week
Start
• When "Range" is "By day of the week"
January 1st Sunday 00 : 00
• When "Range" is "By Date"
January 01 00 : 00
End
• When "Range" is "By day of the week"
January 1st Sunday 00 : 00
• When "Range" is "By Date"
January 01 00 : 00
NTP Settings Synchronize with NTP Server Disable
Primary NTP Server
LAN Port used for NTP MNT
Secondary NTP Server
LAN Port used for NTP MNT
Screen Setting item Default value
Set Box ID Box ID Device ID
To Next Page
Loading...
