Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
869
● LUN Setting
• Start Host LUNs
• Number of LUNs
• Select Volume
A.4.4.2 Modify LUN Group
For details about this function, refer to "4.4.3 Modify LUN Group" (page 467).
● LUN Group Setting
• Name
● Define LUN Group
Description Specify the LUN from which allocation is to be started.
The smallest LUN among the available LUNs.
Input condition/
Display contents
0 - 4095 (decimal)
Description The number of LUNs, to which the volumes are allocated, is displayed.
Input condition/
Display contents
1 - 4096 (decimal)
Description Select the volume number from which allocation is to be started.
Input condition/
Display contents
Volume number from which allocation is to be started
• If any volumes that cannot be used for allocation exist within the range specified by the LUN number, these
volumes are skipped and the next volume is allocated.
• Volumes that have already been registered in relevant LUN groups are not displayed.
Description Modify the LUN group name.
An existing LUN group name cannot be specified.
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Refer to "Define LUN Group" (page 868)
in "Add LUN Group" (page 868) for details.
To Next Page
Loading...
