Chapter 1 System Management
1.8 Network Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
112
The procedure to set the basic information of SNMP Agent is as follows:
1 Click [Setup SNMP Interface] in [Action].
2 Specify the parameters.
The main setting items are as follows.
● Basic Interface
• SNMP Function
• LAN Port used for SNMP
• Authentication Failure
3 Click the [Set] button.
A confirmation screen appears.
4 Click the [OK] button.
Setting of the SNMP Agent basic interface starts.
5 Click the [Done] button to return to the [Network] screen.
If the entered engine ID does not satisfy the input conditions, an error screen appears.
To Next Page
Loading...
