Chapter 1 System Management
1.8 Network Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
121
For details on the parameters for this function, refer to "A.1.7.7 Setup SNMP Agent Community" (page 715).
For the factory default settings for this function, refer to "Appendix B Setup SNMP Agent Community" (page
981).
The procedure to set the SNMP Agent community is as follows:
1 Click [Setup SNMP Community] in [Action].
2 When adding a community, click the [Add] button. Click the [Community Name] link to edit
the community.
The [Setup SNMP Agent Community] screen appears.
To delete the existing community, click the [Delete] button for the target community.
To Next Page
Loading...
