Chapter 1 System Management
1.11 Key Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
177
The procedure to update a key in the key group is as follows:
1 Click [Update SED Key] in [Action].
2 Select whether to use the current key again.
The main setting item is as follows.
● Current SED Authentication Key Setting
• Current Key
3 Click the [Update] button.
A confirmation screen appears.
4 Click the [OK] button.
Updating of the SED Authentication Key starts.
5 Click the [Done] button to return to the [Key Group] screen.
If an error screen appears under the following conditions, check the parameter settings.
• When the master server for the key group is not registered
• When one of the following statuses applies to the key in the key group:
- Unregistered Server Certificate
- Expired Server Certificate
- No SSL Certificate
- Network Error
- Key Server Error
To Next Page
Loading...
