Chapter 1 System Management
1.11 Key Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
179
2 Click the [Browse...] button to specify the path to the "SSL/KMIP Certificate File".
The main setting item is as follows.
● SSL/KMIP Certificate Setting
• SSL/KMIP Certificate File
3 Click the [Import] button.
A confirmation screen appears.
4 Click the [OK] button.
Importing of the SSL/KMIP certificate starts.
5 Click the [Done] button to return to the [Key Group] screen.
If an error screen appears under the following conditions, check the parameter settings.
• When reading of the "SSL / KMIP Certificate" failed
• When the "SSL / KMIP Certificate" file is larger than 4096 bytes
When the imported file was not the "SSL/KMIP Certificate File", an error screen appears. If this occurs,
check the parameter settings.
To Next Page
Loading...
