Chapter 1 System Management
1.13 Remote Support Management (REMCS)
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
202
The main setting items are as follows.
● Send Log based on Events
• Send Log when Errors Occur
● Send Log Periodically
• Periodical Transmission of Log
• Time
• Period
• Day of the Week
3 Click the [Set] button.
A confirmation screen appears.
4 Click the [OK] button.
The parameter settings of log transmission (Automatic Log Transmission) are updated in the
storage system.
5 Click the [Done] button to return to the screen when starting this function in Step 1.
■ Immediately Send Log Manually
In this screen, send log manually and immediately.
1 Click [Setup Log Sending Parameters] in [Action].
2 Click the [Immediately Send Log Manually] tab to change the screen.
To Next Page
Loading...
