Chapter 4 Connectivity Management
4.2 Host Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
366
For details on the parameters for this function, refer to "A.4.2.1 Add FC/FCoE Host Group" (page 817).
For the factory default settings for this function, refer to "Appendix B Add FC/FCoE Host Group" (page 993)
.
The procedure to create an FC host group is as follows:
1 Click [Add FC/FCoE Host Group] in [Action].
2 Input a host group name to be created, and select a host response to be assigned to the
host group.
The main setting items are as follows.
● Host Group Setting
• Host Group Name
• Host Response
To Next Page
Loading...
