Fujitsu ETERNUS DX60 S3 - Page 44

Chapter 1 System Management
1.4 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
44
2 Select the parameters.
The main setting item is as follows.
● Set SMI-S
• SMI-S
Select whether to "Enable" or "Disable" the SMI-S function.
3 Click the [Set] button.
 A confirmation screen appears.
4 Click the [OK] button.
 The SMI-S setting is performed.
5 Click the [Done] button to return to the [System Settings] screen.
End of procedure
Reboot the ETERNUS DX to apply the new setting.