Chapter 4 Connectivity Management
4.4 LUN Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
468
The procedure to modify a LUN group is as follows:
1 Select the LUN group that is to be changed, and click [Modify LUN Group] in [Action].
2 Specify the LUN group name (if required).
The main setting item is as follows.
● LUN Group Setting
• Name
3 Click the [Add] button
The [Add LUN] screen is displayed.
• To delete the LUN and the volume allocation information from a LUN group, select the allocation
information checkbox to delete and click the [Delete] button.
• To change the allocation information between LUNs and volumes, delete the allocation
information that is to be changed. Restart this function to add a new allocation of LUNs and
volumes in the LUN group.
To Next Page
Loading...
