Chapter 4 Connectivity Management
4.8 NAS Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
520
3 Add a quota setting information.
3-1 Click the [Add] button on the bottom right of the quota target list.
The [Add Quota Target] screen appears.
3-2 Input or edit the Quota setting information.
• The [Add] button cannot be clicked under the following conditions. Check the parameter set-
tings.
- The total number of quota setting information to be added exceeds 100 lines
- The total number of existing quota setting information and quota setting information to be
added exceeds the maximum number of information for each model
• The [Delete] button cannot be clicked If no quota setting information is added.
To Next Page
Loading...
