Fujitsu ETERNUS DX60 S3 - Page 581

Chapter 6 Thin Provisioning Pool Management
6.8 Modify Threshold Thin Provisioning Pool
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
581
The main setting items are as follows.
● Threshold Setting
• Warning
• Attention
3 Click the [Modify] button.
 A confirmation screen appears.
4 Click the [OK] button.
 Modify Threshold starts.
5 Click the [Done] button to return to the [Threshold] screen.
End of procedure
When "Warning" is smaller than "Attention", an error screen is displayed.
• When changing a "Attention" threshold, select the checkbox and then specify a new threshold.
• When omitting a "Attention" threshold, clear the checkbox.