Fujitsu ETERNUS DX60 S3 - Page 583

Chapter 6 Thin Provisioning Pool Management
6.9 Modify Cache Parameters (Thin Provisioning Pool)
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
583
2 Change the cache parameters.
The main setting item is as follows.
● Parameters Setting
• Multi Writeback Count (MWC)
3 Click the [Modify] button.
 A confirmation screen appears.
4 Click the [OK] button.
 The cache parameter modification starts.
5 Click the [Done] button to return to the [Threshold] screen.
End of procedure
If the [Default] button is clicked before the [Modify] button, the default cache parameters are
restored.