Fujitsu ETERNUS DX60 S3 - Page 717

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
717
A.1.7.9 Download MIB File
For details about this function, refer to "1.8.9 Download MIB File" (page 126).
For the factory default settings for this function, refer to "Appendix B Download MIB File" (page 981)
.
● Download MIB File
• Option
• Version
A.1.7.10 Setup E-Mail Notification
For details about this function, refer to "1.8.12 Setup E-Mail Notification" (page 130).
For the factory default settings for this function, refer to "Appendix B Setup E-Mail Notification" (page 982)
.
● Notification E-Mail Settings
• Notification E-Mail
• Destination E-Mail Address
• Comment
Description Select the "The ServerView control code is added to the comment line of the MIB
definition file" checkbox when downloading the MIB file used for device monitoring by
ServerView.
Input condition/
Display contents
"The ServerView control code is added to the comment line of the MIB definition file"
checkbox
• Selected
• Cleared
Description Select the SNMP version used for device monitoring.
Input condition/
Display contents
• v1
• v2c/v3
Description Select whether to enable ("Yes") or disable ("No") the E-Mail notification function.
Input condition/
Display contents
• Enable
• Disable
Description Specify the E-Mail destination address.
At least one address must be specified. Up to five addresses can be specified.
Input condition/
Display contents
Up to 63 alphanumeric characters and symbols (except space)
Description Input the message (comment) to be added to the E-Mail. The comment can be omitted.
Input condition/
Display contents
• Up to 255 alphanumeric characters, symbols, and spaces
• Within ten lines