Chapter 1 System Management
1.5 Utility Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
73
The procedure to clear all of the cache data is as follows:
1 Click [Clear Cache] in [Action].
2 Select the cache to clear.
The main setting item is as follows.
● Target Cache Settings
• Target Cache
3 Click the [Clear] button.
A confirmation screen appears.
When "Extreme Cache" or "Extreme Cache Pool" is selected and the clear conditions are not satisfied,
an error occurs. Check the parameter settings.
If an error screen appears under the following conditions, check the parameter settings.
• The system or CM status is not normal
• The PFM status is not normal (when selecting "Extreme Cache")
• The status of RAID groups registered as EXCPs is not normal (when selecting "Extreme Cache Pool")
• Dirty data exists in the cache memory
To Next Page
Loading...
