Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
754
A.1.10.4 Create Key Group
For details about this function, refer to "1.11.5 Create Key Group" (page 172).
For the factory default settings for this function, refer to "Appendix B Create Key Group" (page 984)
.
● Key Group Setting
• Name
• Storage System Group Name
Description Input a key group name.
The key group name corresponds to "Serial Number", which is managed in the key server.
Input condition/
Display contents
• Alphanumeric characters
• Symbols (underscore "_")
• The first letter must be an alphabetic character
• Up to 32 characters
Specify a unique key group name that is different from the other storage systems that use the same key server.
Do not change the key group name after the key status changes to "Normal". The key status can be checked on the
[Key Group] screen. Refer to "Key Group" in "ETERNUS Web GUI User’s Guide (Operation)" for details.
Description Input the storage group name.
The storage system group combines the key management device (Key Management
Machine) name that is managed by the user with the key groups. The storage system
group name corresponds to "Storage Group Name", which is managed in the key server.
If the default setting is used, input "ETERNUS_DX". The "default setting" uses the factory
default storage group name for "ETERNUS SF KM" (key management software).
Input condition/
Display contents
• Alphanumeric characters
• Symbols (underscore "_")
• The first letter must be an alphabetic character
• Up to 16 digits
• "ETERNUS_DX" (When using the default setting)
For the storage system group name, specify the same name as "Storage Group Name", which is registered in the key
server.
Do not change the storage system group name after the key status changes to "Normal". The key status can be
checked on the [Key Group] screen. Refer to "Key Group" in "ETERNUS Web GUI User’s Guide (Operation)" for details.
To Next Page
Loading...
