Fujitsu ETERNUS DX60 S3 - Page 768

Appendix A Parameter List
A.1 System Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
768
A.1.12.3 Update Communication Environment Information
For details about this function, refer to "1.13.4 Update Communication Environment Information" (page 198).
● Information File
• Communication Environment Information File
■ Communication Environment Information
● Connection
• Connection Type
• LAN Port used for Remote Support
● Service
• Scheduled Connection Time (required)
Description Import the "Communication Environment Information File", which was created using the
REMCS ESAT, to the ETERNUS DX.
Click the [Browse...] button to specify the "Communication Environment Information
File", or directly input the path to the "Communication Environment Information File".
Input condition/
Display contents
• Click the [Browse...] button to specify the "Communication Environment Information
File"
• Directly input the path to the "Communication Environment Information File"
When importing Remote Support settings to the ETERNUS DX all at once, click the [Browse...] button to specify the
location where the settings file has been stored, and click the [Import] button.
Description Select the connection type when using the REMCS operation.
Input condition/
Display contents
• Internet Connection
• Internet Connection (E-Mail only)
• P-P Connection
• P-P Connection (E-Mail only)
• P-P Connection (VPN Connection)
• P-P Connection (VPN Connection E-Mail only)
Description Select the LAN port of the ETERNUS DX that is used for REMCS operation.
Input condition/
Display contents
• MNT
• RMT
Description Input the time for scheduled REMCS connection.
Input condition/
Display contents
• Numeric characters
• Hour (00 - 23)
• Minute (00 - 59)