Chapter 1 System Management
1.6 Eco-mode Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
81
For details on the parameters for this function, refer to "A.1.5.3 Modify Eco-mode Schedule" (page 694).
The procedure to modify an Eco-mode schedule is as follows:
1 Select the Eco-mode schedule that is to be edited and click [Modify Schedule] in [Action].
2 Select the event that is to be modified and click the [Edit Event] button.
3 Modify the event content.
• To apply the modified Eco-mode schedule to each RAID group, refer to the procedure in "5.7 Assign Eco-
mode Schedule (RAID Group)" (page 547).
• To apply the modified Eco-mode schedule to each Thin Provisioning Pool, refer to the procedure in "6.10
Assign Eco-mode Schedule (Thin Provisioning Pool)" (page 584).
To Next Page
Loading...
