Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
830
■ When registering a host by manually specifying the host
● Host Setting
• WWN
A.4.2.8 Add iSCSI Host
For details about this function, refer to "4.2.10 Add iSCSI Host" (page 410).
For the factory default settings for this function, refer to "Appendix B Add iSCSI Host" (page 993)
.
■ When registering a host by selecting from the host list
● Host Setting
• Checkbox to select a host
Description Input the WWN for the FC host.
Input condition/
Display contents
• Hexadecimal numbers (0 - 9, A - F, a - f)
• 16 digits ("F (f)" or "0" used in entire 16 digits are not allowed)
For setting items, refer to "Host Setting" (page 829)
in "When registering a host by selecting from the host list"
(page 829).
Description Select the checkbox of the iSCSI host that is to be registered in the ETERNUS DX.
Input condition/
Display contents
Checkbox
• Selected
• Cleared
• If the iSNS server has not been configured in "4.3.8 Modify iSCSI Port Parameters" (page 446), the iSCSI host
cannot be automatically acquired.
• The following restrictions in the environment that is described below apply for the automatic acquirement of
host information (*1) even when the iSNS server is specified.
*1: "iSCSI Name", "IP Version", "IP Address", and "Alias Name"
- When one of the following OSs is used and there are multiple hosts that have the same iSCSI name but
different IP addresses, only the information of one host can be acquired.
• Windows Server 2003
• Windows Server 2008
• Windows Server 2008 R2
• Oracle Solaris 10
- When the host OS is Oracle Solaris 11, "IP Version" and "IP Address" cannot be acquired.
• The following items can be specified only for the iSCSI hosts that are selected by checkboxes; "Name", "Host
Response", "IP Version", "IP Address", "Alias Name", "CHAP User ID", "CHAP Password", and "Confirm CHAP
Password".
To Next Page
Loading...
