Fujitsu ETERNUS DX60 S3 - Page 835

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
835
• Host Response
A.4.2.11 Modify iSCSI Host
For details about this function, refer to "4.2.16 Modify iSCSI Host" (page 425).
● iSCSI Host Setting
• Name
• iSCSI Name
Description Select a new host response that is to be assigned to the FC host.
The host response list created in the ETERNUS DX is displayed.
This item is available only when an FC host is not registered in the host group.
Input condition/
Display contents
• Solaris MPxIO
• HP-UX
• AIX
• AIX VxVM
• VS850/SVC
• BS2000
• Host responses created in the ETERNUS DX
• Default
Description Specify a new iSCSI host name.
An existing host name cannot be specified.
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Description Specify an iSCSI name of the iSCSI host.
Input condition/
Display contents
• 4 - 223 alphanumeric characters and symbols ('-', '.', ':')
• The name starts with "iqn." or "eui."