Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
867
• FC Frame Size
• Reset Scope
• Release Reservation if Chip is Reset
● Destination
• Checkbox to select copy destination port
Description Select the FC frame size (bytes) of the target port.
"FC Frame Size" specifies the length of the communication information.
Input condition/
Display contents
• 512
• 1024
• 2048
Description Specify the reset scope of the target port.
Reset scope is the range where the command reset request from the server is performed,
when the target port is connected to multiple servers.
Input condition/
Display contents
• I_T_L (I: Initiator, T: Target, L: LUN)
Reset (cancel) the command request from the server that sent the command reset
request.
• T_L (T: Target, L: LUN)
Reset (cancel) the command request from all of the servers that are connected to the
port.
Description Select whether to "Enable" or "Disable" the function to release the reserved status of the
volume when the target port (chip) is reset.
Input condition/
Display contents
• Enable
• Disable
Description Select the checkbox of the copy destination port.
Input condition/
Display contents
Checkbox
• Enable
• Disable
To Next Page
Loading...
