Fujitsu ETERNUS DX60 S3 - Page 877

Appendix A Parameter List
A.4 Connectivity Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
877
*1: "PRHL (Default)" indicates "Peripheral device addressing (Default)" and "FLAT" indicates "Flat space addressing".
*2: This parameter is ignored when the LUN addressing setting is "FLAT".
*3: This parameter is ignored when the LUN addressing setting is "PRHL (Default)".
A.4.5.2 Modify Host Response
For details about this function, refer to "4.5.3 Modify Host Response" (page 474).
● Host Response Name
• Name
● LUN Setting
● ALUA Settings
● Inquiry Command Settings
Description Renames a host response.
An existing host response name cannot be used.
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
Refer to "LUN Setting" (page 870) in "Add Host Response" (page 870) for details.
Refer to "ALUA Settings" (page 871)
in "Add Host Response" (page 870) for details.
Refer to "Inquiry Command Settings" (page 872)
in "Add Host Response" (page 870) for details.