Chapter 1 System Management
1.7 User Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
88
5 Click the [Apply] button.
A confirmation screen appears.
6 Click the [OK] button.
The user account setup starts.
7 Click the [Done] button to return to the [Define Role] screen.
■ Delete User Account
The procedure to delete a user accounts is as follows:
1 Click [Setup User Account] in [Action].
2 Select the deletion target user accounts (multiple selections can be made).
• "Software" is the dedicated role that is used for external software. A user account with the
"Software" role cannot log in to ETERNUS Web GUI.
• To change the password, select the "Change Password" checkbox.
• If an error screen appears under the following conditions, check the parameter settings.
- When a parameter does not satisfy the input conditions
- When the "Change Password" checkbox is selected and "New Password" and/or "Confirm New
Password" is not input
- When the "Change Password" checkbox is selected and "New Password" does not match
"Confirm New Password"
To Next Page
Loading...
